RF product search
Radio Frequency
Fiber Optics
Low Frequency
Product search
RF Product Search
RF Coaxial Cables
RF Cable Assembly
RF Cable Connectors
RF Panel Connectors
RF Print Connectors
RF Adaptors
RF Attenuators
RF Terminations
Lightning / EMP protectors
Antenna
RF Coupler and Tapper
RF Filter
RF Power Splitter
Products » Product search » RF Product Search » RF Terminations

Print viewCoaxial terminations online data base
Item details  
HUBER+SUHNER Type6701.01.B  
Picture 6701.01.B
Termination DescriptionFeed Through Termination, Low Power
Series / Configuration
Highlights
  • • BNC (m)  to  BNC (f) – Type
Item number22543742
Data sheet
  6701.01.B
Catalogue drawing
  6701.01.B
2002/95/EC (RoHS)
compliant
2002/96/EC (WEEE)no special marking needed
Interface Standard1IEC 60169-8;   MIL-STD-348A/301;   CECC 22120
Interface Standard2IEC 60169-8;   MIL-STD-348A/301;   CECC 22120
Electrical dataJump to [Top] 
Nominal Impedance1Interface BNC - plug (male)50Ω
Nominal Impedance2Interface BNC - jack (female)50Ω
Average Power to 70 °C ambient temperature
linearly derated to 0 W at 130 °C ambient temperature Graph see below		0.4W
Frequency range Frame 0 to 1GHz
    VSWR Frame ≤ 1.25 
    Return Loss Frame > 19.08dB
Detail values
Frequency Range 10 to 0.1GHz
    VSWR1≤ 1.05 
    Return Loss1> 32.26dB
Frequency Range 20.1 to 0.5GHz
    VSWR2≤ 1.1 
    Return Loss2> 26.44dB
Frequency Range 30.5 to 1GHz
    VSWR3≤ 1.25 
    Return Loss3> 19.08dB
Min. Return loss vs. Frequency


Select graph
Mechanical dataJump to [Top] 
Length Coaxial 50.5mm
Environmental and general dataJump to [Top] 
Weight 0.022kg
Material dataJump to [Top] 
2002/95/EC (RoHS)
compliant
2002/96/EC (WEEE)no special marking needed
BNC - plug (male) – Interface
Piece partBase materialPlating
Center contactCopper Beryllium AlloyGold Plating (without Nickel underplating)
Outer contactBrassSUCOPLATE (R) Plating
InsulatorPFA / PTFE 
Heat sink bodyBrassSUCOPLATE (R) Plating
Coupling nutBrassSUCOPLATE (R) Plating
GasketMVQ (Silicone Rubber) 
BNC - jack (female) – Interface
Piece partBase materialPlating
Center contactCopper Beryllium AlloyGold Plating (without Nickel underplating)
Outer contactBrassSUCOPLATE (R) Plating
InsulatorPFA / PTFE 
Heat sink bodyBrassSUCOPLATE (R) Plating
TestsJump to [Top] 
Following tests have been passed successfully. For any details please contact your nearest HUBER+SUHNER representative.
Test descriptionSpecification / Paragraph / Method
privacy policy | disclaimer © 2012 HUBER+SUHNER | last review 29-Oct-2010